If you have any trouble logging in to your account, contact us.
Sign Up
To start 3D printing or Laser Cutting, you'll need to create an account here. Once done, you'll be able to upload your files and get live quotes of yours parts
By clicking on “Create my account”, you give Sculpteo the authorization to process the information submitted above to create your account on the website. By clicking on corresponding boxes, you give Sculpteo the right to send you by mail its newsletter, news from its blog and/or commercial communications. To know more about how Sculpteo processes your personal information, you can check the privacy policy.
Direct Metal Deposition (DMD) Fabrication Process for Metal 3D Prints
Metal additive manufacturing is taking more and more space in the industry. From aeronautics to medical applications, these 3D printing technologies are offering brand new opportunities. Here, we will talk about Direct Metal Deposition, an additive manufacturing technology using a laser to melt the metallic powder. Unlike most other technologies, it is not based on a powder bed but uses a feed nozzle to drive the powder into the laser beam. It is very similar to Fused Deposition Modeling as the nozzle can move to deposit the fused metal.
In Direct Metal Deposition, the laser beam and the powder spray are focused and scan the substrate to deposit the metal. BeAM is one of the primary DMD machine manufacturers.
What is Direct Metal Deposition?
Like most metal 3D printing technologies (selective laser melting, direct metal laser sintering), this technology is based on transforming powdered metal into a solid metallic object. The main principle is to use a powder feed nozzle and then propulse the powdered metal into the laser beam. The laser then fuses the powdered metal. Using a layer-by-layer strategy, theprinter head, composed of the laser beam and the feed nozzle, can scan the substrate to deposit successive layers. The deposit width is between 0.6 to 2.4 mm, whilethe layer thicknesslies between 0.2 and 0.8 mm.
Where does this technology come from?
In the first place, Direct Metal Deposition was called Laser Cladding as it can be used to add a certain amount of metal to repair a damaged part. With the expansion of 3D printing technologies to create near-end-use parts, this technology is also used to create an entire object. Then, the substrate is no longer a part to be repaired but a platform to start building.
This metal additive manufacturing technique can also be called Laser Metal Deposition or LMD.
What are the materials used for DMD?
This laser metal deposition technology can process all kinds of metallic materials. Among the most common are steel and aluminum. But very technical materials are also available such as Nickel based alloys, Titanium, Cobalt, and Copper. It is possible to use this technology with custom alloys, totally matching your requirements!
What are the particularities of this 3D printing technique?
Among all the laser-based metal 3D printing technologies, DMD is the only one not based on a powder bed. In SLM and DMLS, the unfused metallic powder is used as support material and can be reused. In DMD, supports can be required to maintain the building object, but almost all the powder is solidified. There is no powder waste to recycle. This technology also can comply with a freeform substrate. A planar building platform is not compulsory.
One of the essential advantages of Laser Metal Deposition is the low heat applied during the process. Moreover, the high level of control over the laser means that exact amounts of energy can be used in the highly defined regions of the substrate. This is a reliable manufacturing technique, as you can easily adjust the laser beam, which is also relatively stable.
The numerous applications of this technology that we will see later on this page are also part of the various advantages of this metal 3D printing technique.
What are the applications of DMD?
This technology is mainly used in aeronautics to repair complex and expensive parts instead of replacing them. That way, the manufacturer saves a spare part and the cost of disassembly and reassembly. This is particularly useful for some expensive components. Instead of getting a new expensive metal part, it is now possible to fix it using DMD.
This laser metal deposition technology can also be used to repair existing parts. Indeed, Direct Metal Deposition is the only existing method we know, able to repair, reconfigure or resurface existing parts, molds, or dies by adding metal that matches the parent tool. This technique appears to be an excellent benefit for tooling processes. This singular 3D printing technique is also used for efficient coating and welding. It is possible to use it to reinforce components locally or to adapt them in terms of geometry
LENS system by Optomec used to repair a metalic part by Direct Metal Deposition ( Image credit: Optomec)
Have you ever heard about 3D-printed bridges? For example, this laser metal deposition technique can also be used on a larger scale for architectural projects. Indeed, MX3D, a Dutch team, used this technology to build a metallic bridge. The particularity of the project is that the 3D printers were explicitly conceived to move into the building bridge. It is the first bridge entirely built by robots!
This is how it should look like during the bridge building (Image credit: 3D natives).
One of the first firms to propose this technology is Optomec, which patented its LENS system. Other leading actors in this field are Trumpf and the French company BeAM.
Direct Metal Deposition is mainly used in aeronautics, one of the leading industrial fields active in additive manufacturing. Download our ebook to learn about the four areas where 3D printing is unstoppable.
Connect with Google
Connect with Facebook
